Aluminum soild wall panel
Model NO.: GLSAP047
Supporting Construction: Block Construction
Metal Curtain Wall Kind: Aluminum Panel Curtain Wall
Usage: Exterior Wall
Surface Treatment: PVDF Coating/ Power Coating
Lead Time: 20days
Transport Package: Wooden Case
Material: Aluminum Alloy
Number of Layers: Single
Shape: Standard Plane
Width: ≤ 1500
Alu Alloy: 1100, 3003
HS Code: 76061240
INTRODUCTION FOR THE SOLID ALUMINIUM PANELS,
The aluminum curtain wall panel is made of high intensity aluminum alloy plates, the custom thickness is 1.5mm, 2.0mm, 2.5mm and 3.0mm, model 3003 and phase H24, the custom max dimension is 1220x2440 (mm). It is composed of plate, reinforcement bars and corner racks. The corner racks can be shaped from plate or punched or riveted at the edge. The reinforcement bars are soldered on back of plate to reinforce intensity and hardness of whole pane, this structure gives the panel better flatness and shock resistance as well as the long lifetime. If you want it to be sound and thermal isolation, we can add sound and thermal isolating material inside the panel.
Solid aluminium panels have many advantages compare to the acp/acm:
1,The hardness is up to Mohs' scale 6.0,higher than steel but lower than diamond.
2,Scratch resistant and easy to clean, far better in cleaning than fluorocarbon coating and powder injection.
3,Discoloration proof and environment resistant, it is not discolored under sunshine.
4,Alkalinity or acidity resistant and isolation (A grade fireproof level)
5,Easy for installation
6,Lifetime up to 50 years with unchanged performance
7,Available for artistical decoration without changing performance.
8,Corrosion resistant, salty fog test over 2000 hours.
9,Strong chemical corrosion resistant.
10,It can inhibit bacteria from growing, easy to clean
11,The material is produced from mineral substance without any harmful substance;
Lining and measuring-positioning-inspecting materials-pre-installation-main body installation-Enamel aluminum panel installation and adjustment-clean
Line and measure the installation place with precision instruments according to construction or installation drawing sheet. Position the base line of installing enamel aluminum panels, double check the data and draw a final installation sheet.
2, Construct main body
The design of main body is adjustable, the steel supports and main body must be connected with mechanical fixings stably and correctly. The measurement deviation of pre-installed parts should not be more than 10mm, the deviation of pre-installed position and designed position should not be more than 20mm. Double check and measure the flatness, verticality, connection and soldering after main body is installed.
3, Transport the enamel aluminum composite panels to the installation spot.
As the panels have different shapes according the construction requirements, it is required to sort the panels and put them independently, the height of piled panels should not be more than 2m.
4, Install enamel aluminum panels
Install panels according to drawing and construction data, install the right panels at the right place, do not cut and process the panels as they have been processed correctly according to drawing and measurements, and install the panels according to colors and patterns required by the construction design.